We have developed over fifty different packaging test machines since our founding in 1989.
Informed by customer feedback, our in-house team of engineers carefully designs and manufactures each piece of equipment to solve a specific quality control problem.
If you do not find a solution that fits your needs, please contact us.
We can also design and build custom QA machines to fit your unique sample.
Informed by customer feedback, our in-house team of engineers carefully designs and manufactures each piece of equipment to solve a specific quality control problem.
If you do not find a solution that fits your needs, please contact us.
We can also design and build custom QA machines to fit your unique sample.
Sorted by sample type:
Please scroll down for a full product list
Sorted by test type:
Torque testing:
| Name of Product | Description |
|---|---|
| TMV5 | Touchscreen electronic torque tester |
| TMV7 | Touchscreen electronic torque tester |
| ADATMV5 | Automatic electronic torque tester |
| TORQUE CHECK | Handheld torque controller |
| ADATMV5-S | On-line automatic electronic torque tester |
| BT ETA TORQUE ECO | Dynamometric calibration torque bottle |
| BT ETA TORQUE BOTTLE | Dynamometric torque bottle for capping heads |
| BT ETA 5 | Touchscreen dynamometric torque bottle for capping heads |
| ADATMV - ECO | Semi-automatic electronic torque tester |
Stress testing:
Pressure / Vacuum testing:
| Name of Product | Description |
|---|---|
| (NEW) CDP-1 | Pressure Calibration Device |
| VLT-ECO | Air- and water-tight vacuum chamber |
| VLT-ST | Air- and water-tight vacuum chamber with touchscreen controls |
| VLT-PLC | Air- and water-tight vacuum chamber with touchscreen programmable logic controls |
| (NEW) SSA-AUTO | Automated secure seal analyzer through bubble point |
| SSA-ECO | Secure seal analyzer through bubble point |
| SSA-D | Secure seal analyzer through bubble point with digital touchscreen |
| SSA-PLC-12 | 12-Position secure seal analyzer through bubble point with digital touchscreen logic controls |
| Cork aphrometer | Pressure analyzer in sparkling wine bottles (disgorging stage) |
| Crown cap aphrometer | Pressure analyzer in sparkling wine bottles (secondary fermentation) |
| Permanent aphrometer | Analyzer of pressure evolution in sparkling wine bottles (secondary fermentation) |
| Simplified aphrometer | Pressure and vacuum analyzer in still wine bottles (Bordeaux/Burgundy) |
PET Bottle Cutting
| Name of Product | Description |
|---|---|
| HWBC-1 | Manual hot wire bottle cutter for section weight analysis |
| HWBC-2 | Enclosed automatic hot wire bottle cutter for section weight analysis |
| (NEW) ACWD-1 | Automatic Bottle Cutting & Weighing Device |
Force / Compression testing:
| Name of Product | Description |
|---|---|
| DYNA-4000 | Max top-load resistance tester for PET bottles & cans |
| GBIT | Glass bottle impact resistance tester |
| BTLT-2 | Max top-load resistance tester for glass bottles |
| BT ETA FORCE | Dynamometric force bottle with built-in measurement for capping heads |
| BT ETA FORCE SHF | Dynamometric force bottle for capping heads |
| BTT-1 | Bottle tilt tester |
| Dynamometers | Various analog and digital dynamometers for tensile or compression resistance measuring |
| FT-1 | Automatic repeating fatigue tester for packaging |
| POT-1 | Bottle cap pull-off force tester |
| TCT-2 | Universal traction and compression resistance tester |
Enamel Integrity rating:
| Name of Product | Description |
|---|---|
| ER-1 | Enamel rater for determining the integrity of the inner coating of containers |
Dimensional measuring:
| Name of Product | Description |
|---|---|
| AMTG-2 | Magnetic thickness gauge for non-magnetic samples |
| BCG | Base clearance gauge for measuring PET-Bottle dome height |
| BTG-D | Glass bottle wall thickness gauge |
| CM | Circometer for measuring outer circumference |
| FHG | Fill height gauge for measuring bottle content level |
| FHS | Fill height syringe for finely adjusting bottle content level |
| HG-1 | Simple height gauge for packaging |
| LS-1 | Dome height lighting system for glass bottles |
| LSS | Glass bottle lighting system for general observation |
| PPG-A / PPG-D | Preform perpendicularity gauge |
| PTG-A / PTG-D | Preform thickness gauge |
| (NEW) UBPT-1/1S | Universal bottle perpendicularity gauge |
| (NEW) UBPT-2 | Universal bottle perpendicularity gauge with mouth clearance gauge |
| (NEW) UBPT-3 | Universal bottle perpendicularity gauge with mouth clearance gauge and height gauge |
Crown Cap testing:
| Name of Product | Description |
|---|---|
| CCAG | Crown cap angle gauge |
| CCLT | Crown cap leak tester |
| HDC | Crown cap height and thickness gauge |
| IDG-1 | Internal diameter gauge for determining if diameter fits measurement standard or not |
| ODG-1 | Outer diameter gauge for determining if a sample fits a measurement standard |
| PGNG | Go-no-go gauge for determining if sample fits proper measurement standard |
CO2 / Pressure / Vacuum Calculating:
| Name of Product | Description |
|---|---|
| CO2-CS | Automatic CO2 measuring system |
| CO2DA 2017 | Automatic shaker and CO2 calculator |
| CO2-P CO2 | CO2 Purity tester |
| CO2EASY / CO2EASY-D | CO2 measuring device |
| PVG-A / PVG-D | Simple pressure or vacuum gauge |
| PVG-P | Portable pressure or vacuum gauge |
| PVG-Pocket | Pocket pressure or vacuum gauge |
Aluminum Can Seam testing:
| Name of Product | Description |
|---|---|
| ANSS | Antinoise seaming cutting saw |
| CG-D | Can countersink gauge |
| CIDG-1 | Can internal diameter gauge |
| CO | Double-seam preserving can opener |
| CSM | Can seam micrometer |
| ECDG-1 | Can End Curl Diameter Gauge |
| FWG-1 | Can flange width gauge |
| PTG-1 | Can Plate Thickness Gauge |
| SeamCheck | Automatic double seam inspector for aluminum cans |
| SLG-1 | Seam length gauge |
| SS-1 | Seaming cutting saw |
| STG-1 | Seam thickness gauge |
Burst testing:
| Name of Product | Description |
|---|---|
| GBBT-1 | Glass bottle burst tester |
| GBBT-2 | Simultaneous dual glass bottle burst tester |
| PBBT-2 | PET bottle burst tester |
| (NEW) PBBT-ECO | PET bottle burst tester |
FULL PRODUCT LIST
| Name of Product | Short Description | Product Category |
|---|---|---|
| PBBT-2 | PET bottle burst tester | Burst-test |
| PBBT-ECO | PET bottle burst tester | Burst-test |
| GBBT-1 | Glass bottle burst tester | Burst-test |
| GBBT-2 | Simultaneous dual glass bottle burst tester | Burst-test |
| SeamCheck | Automatic double seam inspector for aluminum cans | Can-Seaming |
| ANSS | Antinoise seaming cutting saw | Can-Seaming |
| SS-1 | Seaming cutting saw | Can-Seaming |
| STG-1 | Seam thickness gauge | Can-Seaming |
| SLG-1 | Seam length gauge | Can-Seaming |
| CIDG-1 | Can internal diameter gauge | Can-Seaming |
| CG-D | Can countersink gauge | Can-Seaming |
| FWG-1 | Can flange width gauge | Can-Seaming |
| CSM | Can seam micrometer | Can-Seaming |
| CO | Double-seam preserving can opener | Can-Seaming |
| ECDG-1 | Can End Curl Diameter Gauge | Can-Seaming |
| PTG-1 | Can Plate Thickness Gauge | Can-Seaming |
| CO2-P CO2 | CO2 Purity tester | CO2/Pressure/Vacuum-Gauge |
| CO2EASY / CO2EASY-D | CO2 measuring device | CO2/Pressure/Vacuum-Gauge |
| CO2-CS | Automatic CO2 measuring system | CO2/Pressure/Vacuum-Gauge |
| PVG-A / PVG-D | Simple pressure or vacuum gauge | CO2/Pressure/Vacuum-Gauge |
| CCLT | Crown cap leak tester | Crown-Cap |
| PGNG | Go-no-go gauge for determining if sample fits proper measurement standard | Crown-Cap |
| HDC | Crown cap height and thickness gauge | Crown-Cap |
| CCAG | Crown cap angle gauge | Crown-Cap |
| ODG-1 | Outer diameter gauge for determining if a sample fits a measurement standard | Crown-Cap |
| IDG-1 | Internal diameter gauge for determining if diameter fits measurement standard or not | Crown-Cap |
| AMTG-2 | Magnetic thickness gauge for non-magnetic samples | Dimensional-Measure |
| HG-1 | Simple height gauge for packaging | Dimensional-Measure |
| CM | Circometer for measuring outer circumference | Dimensional-Measure |
| BCG | Base clearance gauge for measuring PET-Bottle dome height | Dimensional-Measure |
| BTG-D | Glass bottle wall thickness gauge | Dimensional-Measure |
| LSS | Glass bottle lighting system for general observation | Dimensional-Measure |
| LS-1 | Dome height lighting system for glass bottles | Dimensional-Measure |
| PTG-A / PTG-D | Preform thickness gauge | Dimensional-Measure |
| (NEW) UBPT-1/1S | Universal bottle perpendicularity gauge | Dimensional-Measure |
| (NEW) UBPT-2 | Universal bottle perpendicularity gauge with mouth clearance gauge | Dimensional-Measure |
| (NEW) UBPT-3 | Universal bottle perpendicularity gauge with mouth clearance gauge and height gauge | Dimensional-Measure |
| PPG-A / PPG-D | Preform perpendicularity gauge | Dimensional-Measure |
| FHG | Fill height gauge for measuring bottle content level | Dimensional-Measure |
| FHS | Fill height syringe for finely adjusting bottle content level | Dimensional-Measure |
| ER-1 | Enamel rater for determining the integrity of the inner coating of containers | Enamel-Integrity |
| TCT-2 | Universal traction and compression resistance tester | Force/Compression |
| BTLT-2 | Max top-load resistance tester for glass bottles | Force/Compression |
| DYNA-4000 | Max top-load resistance tester for PET bottles & cans | Force/Compression |
| GBIT | Glass bottle impact resistance tester | Force/Compression |
| FT-1 | Automatic repeating fatigue tester for packaging | Force/Compression |
| POT-1 | Bottle cap pull-off force tester | Force/Compression |
| BTT-1 | Bottle tilt tester | Force/Compression |
| BT ETA FORCE SHF | Dynamometric force bottle for capping heads | Force/Compression |
| BT ETA FORCE | Dynamometric force bottle with built-in measurement for capping heads | Force/Compression |
| Dynamometers | Various analog and digital dynamometers for tensile or compression resistance measuring | Force/Compression |
| HWBC-2 | Enclosed automatic hot wire bottle cutter for section weight analysis | PET-Section-Weight |
| HWBC-1 | Manual hot wire bottle cutter for section weight analysis | PET-Section-Weight |
| ACWD-1 | Automatic Bottle Cutting & Weighing Device | PET-Section-Weight |
| VLT-ECO | Air- and water-tight vacuum chamber | Pressure/Vacuum |
| VLT-ST | Air- and water-tight vacuum chamber with touchscreen controls | Pressure/Vacuum |
| VLT-PLC | Air- and water-tight vacuum chamber with touchscreen programmable logic controls | Pressure/Vacuum |
| (NEW) SSA-AUTO | Automated secure seal analyzer through bubble point | Pressure/Vacuum |
| SSA-ECO | Secure seal analyzer through bubble point | Pressure/Vacuum |
| SSA-D | Secure seal analyzer through bubble point with digital touchscreen | Pressure/Vacuum |
| SSA-PLC-12 | 12-Position secure seal analyzer through bubble point with digital touchscreen logic controls | Pressure/Vacuum |
| PL-G | Polarization light for glass stress viewing | Stress-Application |
| PL-P | Polarization light for preform stress viewing | Stress-Application |
| SCT-PLC | Stress crack tester for single PET bottle | Stress-Application |
| SCT-D | 26-position stress crack tester for PET bottles | Stress-Application |
| TWB-1 | Thermostatic water bath | Stress-Application |
| (NEW) TMV7 | Touchscreen electronic torque tester | Torque |
| TMV5 | Touchscreen electronic torque tester | Torque |
| ADATMV - ECO | Semi-automatic electronic torque tester | Torque |
| ADATMV5 | Automatic electronic torque tester | Torque |
| ADATMV5-S | On-line automatic electronic torque tester | Torque |
| BT ETA TORQUE ECO | Dynamometric calibration torque bottle | Torque |
| BT ETA 5 | Touchscreen dynamometric torque bottle for capping heads | Torque |
| BT ETA TORQUE BOTTLE | Dynamometric torque bottle for capping heads | Torque |
| TORQUE CHECK | Handheld torque controller | Torque |