AT2E's product line

Cap Torque Testers

TMV7 - TOUCH SCREEN ELECTRONIC TORQUE TESTER

Our torque tester are designed with a special mechanical system for measuring torque which cancels most non-coaxial and top load influences on the measurement. These features cancel most operator induced influences on the measurement for maximum repeatability.

TMV5 - TOUCH SCREEN ELECTRONIC TORQUE TESTER

ADATMV5 - MONOPOST AUTOMATED TORQUE TESTER

The ADATMV automated torquetester allows to control your torque without any human influence . This TOTAL abstraction of the human factor provides a high accuracy in measuring and optimization of your datas analysis in Lab or bottling line.

BT ETA 5 - Touch Screen Dynamometric Torque Bottle

Our Torquemeters are designed with a special mechanical system for measuring torque which cancels most non- coaxial and top load influences on the measurement. These features cancel most operator influences on the measurement for maximum repeatability

BT ETA TORQUE - Dynamometric Torque Bottle

Our torquetester are built in with special mechanism permitting to avoid top load influence on measurement. Also built in a high speed electronic reading of measurements.

BT ETA FORCE SHF - Dynamometric Force Bottle

Our dynamometers include a special mechanical design permitting to avoid all influence from non coaxial efforts. Also built in a high speed electronic reading of measurements

TCT-2 Traction and Compression Tester (Universal Tester)

AT2E TCT-2 measure the resistance to tear or top load force (traction or compression) for all kind of packaging. Sample installed on the support and the force is raised in tear or top load direction gradually. The distance between the gauge and the support plate and column can be adjusted on request.

DYNA-4000 Dynamometer

The DYNA-4000 is an instrument for testing the resistance to top load effort on PET bottles or cans

FT-1 Fatigue Tester

The “FT-1 Fatigue Tester” is used to test and analyze the durability and quality of all packaging in compression or traction direction. It’s widely used in cosmetic, pharmaceutical and other industries.

BT ETA TORQUE ECO - Dynamometric Torque Bottle

The new AT2E BT ETA TORQUE ECO has been developed in order to allow operators and calibration team to check in a fast way the accuracy of any torquetesters.

TORQUE CHECK - Hand Held Torque Controller

The TORQUE CHECK has been developed in order to allow operators to control the torque, calibration team to check in a fast way the accuracy of any torquetesters and maintenance to control and adjust torque directly on capping heads

VLT-ECO Vacuum Leak Tester

(ECO Model) (Air and water tight test box: vacuum test)

VLT-ST Vacuum Leak Tester (Standard Model)

VLT-ST is equipped with a touching screen. It‘s visual and easy to operate. Adjustable vacuum and holding time stage setting, meets different test requests of various products.

VLT-PLC Vacuum Leak Tester

(PLC Model) (Air and water tight test box: vacuum test)

SSA-ECO Secure Seal Analyzer (ECO Model)

AT2E SSA-ECO secure seal analyzer is for testing the secure seal performance of products. By vacuum technology and special design, the needle uses a function of self-holding on the tested products.

SSA-D Secure Seal Analyzer (Standard Model)

AT2E SSA-D secure seal analyzer is for testing the secure seal performance of products. With AT2E patent needle, it makes the installation and piercing very quick and easy in any medium

CCLT Crown Cap Leak Tester

Used for testing the air-tightness of the crown cap. Stainless steel design ensures the durability of the tester during test.

BTG-D Glass Bottle Wall Thickness Gauge

BTG-D Digital Glass Bottle Wall Thickness Gauge is a manual operating gauge which is used for measuring the wall thickness of glass bottles.

CO2EASY / CO2EASY DIGITAL-T CO2 Measuring Device

For a constant quality and taste of all kinds of carbonated drinks, the critical parameter is the CO2 (carbon dioxide) content in the liquid.

PVG-A/PVG-D Pressure or Vacuum Gauge

The "PVG" is used to measure pressure or vacuum of can or bottle. Simply place the sample under the entity manometer or vacuum meter and lower the lever

CO2-CS Automatic CO2 Calculating System

CO2-CS Automatic CO2 Calculating System is an innovative and full automatic CO2 content calculating system which is newly developed by AT2E.

BTLT-2 Glass Bottle Top Load Tester

Maximum Top Load Resistance Tester for Glass Bottles

ANALOG BUBBLE TESTER | LEAK TESTER BY PRESSURIZATION | SSA ECO

AT2E SSA-ECO secure seal analyzer is for testing the secure seal performance of products. With AT2E patent needle, it makes the installation and piercing very quick and easy in any medium. By vacuum technology and special design, the needle uses a function of self-holding on the tested products. However, the SSA-ECO can be compatible with using the needle of the classic Secure Seal Tester (typical screwed needle). It’s stainless steel design makes it resistant of any explosion during the test and ensures the safety of the operator.

PL-G - Polarization Light for Glass

Stress introduced during the manufacture of glass components has an important effect on the strength of the product. This effect can be detrimental or beneficial in that it may contribute to failure in service, or to an increase in strength. It is clearly important for quality control to monitor the residual stresses that are present.

PL-P Polarization Light for Preform

Many of the defects found in PET container preforms can be detected by using the PL-P. Preforms viewed in polarized light exhibit a colored birefringence pattern.

SCT-D Stress Crack Tester (26 Positions)

The AT2E SCT-D Stress Crack Tester is designed to test the internal stress in bottle base and for determining the stress crack resistance of blow-molded PET carbonated soft drink bottles by measuring the propensity for base cracking upon exposure to an aqueous sodium hydroxide solution under a controlled environment, so that to estimate the long term behavior of bottles.

AMTG-2 Accurate Magnetic Thickness Gauge

The "AMTG-2" is a portable feeler gauge. It is used to measure the thickness of non-magnetic materials, such as plastic, glass, ceramic, aluminum, titanium, copper etc... The accuracy of the measurement is not affected by the shape of the samples.

HG-1 Height Gauge

HG-1 Height Gauge which is equipped with a measuring platform can be used to measure the height of bottle, can and other packaging.

BCG - Base Clearance Gauge

The BCG - Base Clearance Gauge is specifically designed for measuring the dome height in the bottom of PET containers.

PTG-A / PTG-D Preform Thickness Gauge

PTG Preform Thickness Gauge is used to measure the preform thickness.

PBPT-1 PET Bottle Perpendicularity Gauge

PBPT-1 PET Bottle Perpendicularity Gauge is used to measure the perpendicularity (deviation) of PET bottle and it’s a standard equipment for PET bottle manufacture and beverage industries

PPG-A / PPG-D Preform Perpendicularity Gauge

The "PPG-A" and "PPG-D" are used to measure the perpendicularity (deviation) of the preform and it’s a standard equipment for PET and beverage industries.

IDG-1 Internal Diameter Gauge

The aim of this unit is to test whether the internal diameter of the tested sample is within standard or not

FHG - Fill Height Gauge

Simple and useful measuring tool for fill height measurement. It’s designed for all size bottles.

PGNG -Go-no-Go Gauge

Quality control gauges for checking the threaded tops of glass and plastic containers

HDC - Height and Thickness Gauge of Crown Cap

This unit has an excellent basis for measuring. It’s easy to use. Crown cap height and thickness are measured by analog indicator. It is widely used in crown cap, brewery and beverage industries.

ODG-1 Outer Diameter Gauge

The aim of this unit is to test whether the outside diameter of the tested sample is within standard or not

PBBT-1 PET Bottle Burst Tester

PBBT-1 PET Bottle Burst Tester is a specialized test equipment for testing the PET bottles. It’s designed in accordance with the three international test methods which are commonly use

GBBT-1 Glass Bottle Burst Tester

The GBBT-1 is an instrument for testing the internal pressure resistance of glass containers. It has been widely used by the glass container manufacturers and users.

GBBT-2 Glass Bottle Burst Tester

The GBBT-2 is an instrument for testing the internal pressure resistance of glass containers. It has been widely used by the glass container manufacturers and users.

HWBC-2 Hot Wire Bottle Cutter

AT2E innovative HWBC-2 Hot Wire Bottle Cutter offers an automated and cost saving way for cutting containers for section weight analysis.

HWBC-1 Hot Wire Bottle Cutter

The HWBC-1 Hot Wire Bottle Cutter offers an easy and cost saving way for cutting containers for section weight analysis.

ER-1 Enamel Rater

AT2E ER-1 Enamel Rater offers a fast and accurate method to measure the integrality of internal coating of containers.

SeamCheck - Automatic Double Seam Projector

Seaming quality is critical and important for can inspection. And it’s the one of the most concerned point for can, beverage and food manufacturing companies.

ANSS - Antinoise Seaming Cutting Saw

The Antinoise Seaming Cutting Saw is a saw with a noise resistant design and a double blade for double seaming inspections.

SS-1 Seaming Cutting Saw

SS-1 Seaming Cutting Saw is a specially designed saw for seam cutting purpose. Equipped with linear guide rail, cans’ moving during cutting will be very precise and accurate in track.

STG-1 Seam Thickness Gauge

STG-1 Seam thickness gauge is used to measure the Seam thickness of cans. Easy-operation design offers a fast and accurate measurement of seam thickness.

CIDG-1 Can Internal Diameter Gauge

The CIDG-1 Can Internal Diameter Gauge is for quick checking the internal diameter of necked-in cans. For each diameter, a corresponding calibration block will be supplied along with the gauge.

CG-D Countersink Gauge

CG-D Countersink Gauge is a digital gauge for measuring countersink depth of can and end. For fast and easy measurement, the zeroization base is equipped.

FWG-1 Flange Width Gauge

FWG-1 Flange Width Gauge is used to measure the flange width of empty cans. Easy-operation design offers a fast and accurate measurement of flange width.

CSM - Can Seam Micrometer

CSM Can Seam Micrometers is used for a quick measurement of seam thickness and seam length. It’s an easyoperated tool and widely use in canning industry.

CO - Can Opener

A simple and convenient tool used to remove the center section of the can end while keeping the double seam intact.