AT2E - USA  |  Quality control apparatus for packaging and beverage, food, pharmaceutical, cosmetic and other industries.
  • HOME
  • HOME
  • Categories and Test Types
  • TEST TYPE
    • Torque Test
    • Pressure / Vacuum / CO2 Tests
    • Stress Application Tests
    • PET Bottle Testing
    • Burst Testing
  • Products
  • PRODUCTS AT2E
    • ABSD-1 | Automated Beverage Sampling Device
    • ACD-1 | Automatic capping device
    • ACBT-1 | Aerosol Can Burst Tester
    • ACCC-1 | Automated Crown Cap Capper
    • ACWD-1 | Automatic Bottle Cutting & Weighing Device
    • ADATMV5 | Monopost Automated Torque Tester
    • ADATMV5-S | On-line Automatic Torque Tester
    • ADATMV-ECO | Semi-Automated Torque Tester
    • AMTG-2 | Accurate Magnetic Thickness Gauge
    • ANSS | Antinoise Seaming Cutting Saw
    • APHROMETER CORK
    • APHROMETER CROWN CAP
    • APHROMETER PERMANENT
    • APHROMETER SIMPLIFIED
    • APKC-1 | Automated Plastic Keg Capper
    • BCG | Base Clearance Gauge
    • BT ETA 5 | Touchscreen Dynamometric Torque Bottle
    • BT ETA FORCE | Dynamometric Force Bottle
    • BT ETA FORCE SHF | Dynamometric Force Bottle
    • BT ETA TORQUE BOTTLE | Dynamometric Torque Bottle
    • BT ETA TORQUE ECO | Dynamometric Torque Bottle
    • BTG-D | Bottle Wall Thickness Gauge
    • BTG-D-S | Glass Bottle Wall Thickness Gauge
    • BTLT-2 | Glass Bottle Top Load Tester
    • BTT-1 | Glass Bottle Tilt Tester
    • BVPT-1 | Bottle Vacuum-Pressure Tester
    • CCAG | Crown Cap Angle Gauge
    • CCLT | Crown Cap Leak Tester - Crown Cap Sealing Tester
    • CCTT | Tumbling Tester for Crown Closure
    • CDDG-1 | Can Dome Depth Gauge
    • CDP-1 | Pressure Calibration Device
    • CEBT-1 | Can and End Buckle Tester
    • CET | Cork Extraction Tester
    • CG-D | Countersink Gauge
    • CHG | Contact Height Gauge
    • CIDG-1 | Can Internal Diameter Gauge
    • CLA-ECO | Can Leak Analyzer (3 positions)
    • CO2DA | AUTOMATIC SHAKER AND CO2 CALCULATOR
    • CO2-CS | Automatic CO2 Calculating System
    • CO2EASY / CO2EASY DIGITAL | CO2 Measuring Device
    • CO2-P | CO2 Purity Tester
    • CSM | Can Seam Micrometer
    • Digital Caliper
    • DYNA-4000 | Dynamometer
    • Dynamometers
    • ECDG-1 | End Curl Diameter Gauge
    • ER-1 | Enamel Rater
    • FHG | Fill Height Gauge
    • FHS | Fill height syringe
    • FT-1 | Fatigue Tester
    • FWG-1 | Flange Width Gauge
    • GBBT-1 | Glass Bottle Burst Tester
    • GBBT-2 | Glass Bottle Burst Tester
    • GBBT-AUTO | Automated Glass Bottle Burst Tester
    • GBIT | Glass Bottle Impact Resistance Tester
    • GCG | Gate Center Gauge
    • GDTB-1 | Gauge Data Trasportation Box
    • GDTB-4 | Gauge Data Transportation Box
    • HDC | Crown Cap Height and Thickness Gauge
    • HG-1 | Height Gauge
    • HWBC-1 | Hot Wire Bottle Cutter
    • HWBC-2 | Hot Wire Bottle Cutter
    • IDG-1 | Internal Diameter Gauge
    • LS-1 | Dome Height Lighting System for Glass Bottle
    • LSS | Lighting System (Bottle)
    • ODG-1 | Outer Diameter Gauge
    • PATT-1 | Pop and Tear Tester
    • PBBT-2 | PET Bottle Burst Tester
    • PBBT-ECO | PET Bottle Burst Tester
    • PBDT-1 | PET bottle drop tester
    • PGNG | Go-no-Go Gauge
    • PL-G | Polarization Light for Glass
    • PL-P | Polarization Light for Preform (PET Preform Stress Viewer)
    • PMBS | Preform & Bottle Measuring System
    • PPG-A / PPG-D | Preform Perpendicularity Gauge
    • PTG-A / PTG-D | Preform Thickness Gauge
    • PTG-1 | Plate Thickness Gauge
    • PVG-A/PVG-D | Pressure or Vacuum Gauge
    • PVG-P | PRESSURE OR VACUUM GAUGE
    • PVG-Pocket | Portable pressure or vacuum gauge
    • PVG-S | Medidor portátil de presión o vacío
    • SCT-D | Stress Crack Tester
    • SCT-PLC | Stress Crack Tester for PET Bottles
    • SeamCheck | Automatic Double Seam Projector
    • SeamCheck Plus | Automatic Double Seam Projector
    • SRG-1 | Score Residue Gauge
    • SS-1 | Seaming Cutting Saw
    • SSA-AUTO | Secure Seal Analyzer (Automated Model)
    • SSA-AUTO-F | Secure Seal Analyzer
    • SSA-ECO | Secure Seal Analyzer (ECO Model)
    • SSA-D | Secure Seal Analyzer (Standard Model)
    • SSA-PLC-12 | 12-Position Secure Seal Analyzer
    • SLG-1 | Can Seam Length Gauge
    • SRG-1 | Score Residue Gauge
    • SRG-1 | Score Residue Gauge
    • STG-1 | Seam Thickness Gauge
    • STR-1 | Seam Stripper
    • STS-1 | Swing Top Stopper Tester
    • TCT-2 | Traction and Compression Tester
    • TMV7 | Touchscreen Electronic Torque Tester
    • TORQUE CHECK | Handheld Torque Controller
    • TWB-1 | Thermostatic Water Bath
    • UBPT-1/1S | Universal Bottle Perpendicularity Tester
    • UBPT-2 | Universal Bottle Perpendicularity Tester
    • UBPT-3 | Universal Bottle Perpendicularity Tester
    • VLT-ECO | Vacuum Leak Tester (ECO Model)
    • VLT-PLC | Vacuum Leak Tester (PLC Model)
    • VLT-ST | Vacuum Leak Tester (Standard Model)
  • RESOURCES
    • REFERENCES
    • CFR 21 Compliance
    • Conversion tables
  • Store
  • Contact
  • Productos
  • PRODUCTOS AT2E
    • ABSD-1 | Equipo Muestreo Automático de Bebidas
    • ACBT-1 | Probador de Explosión Latas Aerosol
    • ACCC-1 | Taponadora de Corona Automática
    • ​ACWD-1 | Dispositivo automático de corte y pesaje de botella
    • ADATMV5 | Torquímetro Automatizado
    • ADATMV5-S | Torquímetro Automatizado Integrable en Línea
    • ADATMV - ECO | Torquímetro Semi-Automático
    • APKC-1 | Taponador Automático para Barril de Plástico (KEG)
    • BTG-D-S | Medidor de Espesor para Botellas
    • BWCS-A | Sistema para el Control de Pesaje de Botellas
    • BWCS-A | Bottle Weight Control System
    • Calibrador Digital
    • CDP-1 | Calibrador de Presión
    • CEBT-1 | Probador de Lata y Tapas de Anilla
    • GBBT-AUTO | Probador Automático de Explosión de Botellas de Vidrio
    • GCG | Calibrador de centrado
    • GDTB-1 | Caja de transferencia de datos
    • GDTB-4 | Caja de transferencia de datos
    • PBDT-1 | PET probador de caida
  • Referencias
  • RECURSOS
    • CFR 21 Conformidad
    • Tablas de conversión
  • Contacto

PBBT-2 - PET Bottle Burst Tester

Equipment for Control of Resistance to Expand and Explosion of PET Bottle
Picture
Picture
Picture
For PET bottles - Simulating filling process.

PBBT-2 PET Bottle Burst Tester is specialized test equipment for testing the PET bottles. It’s designed in accordance with the three international test methods which are commonly used. Users can choose the test method basing on their requirement. The PBBT-2 is capable to test the capacity of resilience under certain pressure or the rupture test of the PET bottle.
Through the reproduction of the pressurization, the process has been linearized and it increases to the predetermined point or the point of bursting.
After selecting the test program, the cycle will start automatically depending on the settings. The touch screen displays the pressure value in real time and record the maximum pressure and burst pressure.
Optional part water recycling system could provide way of saving water and avoiding the unsteady pressure of tap water which may influence a normal test.
Additional booster could be chosen. It may help the PBBT-2 free of high pressure source.​
 
Characterísticas:
  • Standard equipment for the PET bottle industry;
  • 3 international test methods are available;
  • PLC integrated & Touch screen control;
  • Automatic clamping and filling system;
  • Can store 10 operators and 30 products;
  • User defines the product lot number and sequence number;
  • Display curves of pressure and volume expansion
    during the test;
  • Monitors and records the temperature of the water during the test;
  • Applicable to 2.5 L bottle (consult us for bigger size);
  • Stainless steel design ensures the durability of tester;
  • RS232C data output: connected to either printer or software;
  • Integrated calibration function.

Modes details:

Fill ramp mode:
The filling ramp mode is designed to simulate the situation of filling lines of PET bottles. Under this mode, the PET bottles are pressurized rapidly to the initially preset pressure and maintained for a given time (for example 13 seconds). Then continue to increase the pressure with a speed of 0.1 bar/s until the outbreak of the bottle or reaching the max pressure or volume. Preset parameter includes: initial screening pressure, maximum pressure, and expansion of volume limit.

Burst mode:
Under this mode, PET bottle will be pressurized rapidly to the initially preset pressure and maintained for a predefined period.

Custom mode:
Under this mode, user is able to create the pressure curve to meet the particular conditions of control. Users can define the pressure curve by steps, after the adjustment is made, the corresponding curve will be displayed on the user interface.

Technical specifications:
  • Measuring range: 0 - 20 bar
  • Resolution: 0.1 bar
  • Sample range: Up to 2.5 L bottle
  • Expansion in volume: Up to 2 L
  • Power supply: 115/230V, 50 - 60Hz
  • Pressure required: 3 bar water / 20 bar air source
  • Temperature range: 0 to 50 °C
  • Rear Panel: RS232 serial output
  • Dimensions: 740 (L) × 500 (W) × 920 (H) mm
  • Net weight: 70 kg
 
Accesorios opcionales:
  • Water recycling system
  • Additional booster
  • Compatible clamping system
  • Mini printer
  • Calibration pack (including high accuracy pressure gauge for pressure calibration / calibration graduated flask / spacer)
  • “QualiBurst” Software
  • PABT version with hot water spraying system

PRODUCT VIDEO

TESTER FOR KRG


​AT2E-USA, Inc.   ©   2022   |   Products   |   Terms & Privacy   |   Store   |   Contact
  • HOME
  • HOME
  • Categories and Test Types
  • TEST TYPE
    • Torque Test
    • Pressure / Vacuum / CO2 Tests
    • Stress Application Tests
    • PET Bottle Testing
    • Burst Testing
  • Products
  • PRODUCTS AT2E
    • ABSD-1 | Automated Beverage Sampling Device
    • ACD-1 | Automatic capping device
    • ACBT-1 | Aerosol Can Burst Tester
    • ACCC-1 | Automated Crown Cap Capper
    • ACWD-1 | Automatic Bottle Cutting & Weighing Device
    • ADATMV5 | Monopost Automated Torque Tester
    • ADATMV5-S | On-line Automatic Torque Tester
    • ADATMV-ECO | Semi-Automated Torque Tester
    • AMTG-2 | Accurate Magnetic Thickness Gauge
    • ANSS | Antinoise Seaming Cutting Saw
    • APHROMETER CORK
    • APHROMETER CROWN CAP
    • APHROMETER PERMANENT
    • APHROMETER SIMPLIFIED
    • APKC-1 | Automated Plastic Keg Capper
    • BCG | Base Clearance Gauge
    • BT ETA 5 | Touchscreen Dynamometric Torque Bottle
    • BT ETA FORCE | Dynamometric Force Bottle
    • BT ETA FORCE SHF | Dynamometric Force Bottle
    • BT ETA TORQUE BOTTLE | Dynamometric Torque Bottle
    • BT ETA TORQUE ECO | Dynamometric Torque Bottle
    • BTG-D | Bottle Wall Thickness Gauge
    • BTG-D-S | Glass Bottle Wall Thickness Gauge
    • BTLT-2 | Glass Bottle Top Load Tester
    • BTT-1 | Glass Bottle Tilt Tester
    • BVPT-1 | Bottle Vacuum-Pressure Tester
    • CCAG | Crown Cap Angle Gauge
    • CCLT | Crown Cap Leak Tester - Crown Cap Sealing Tester
    • CCTT | Tumbling Tester for Crown Closure
    • CDDG-1 | Can Dome Depth Gauge
    • CDP-1 | Pressure Calibration Device
    • CEBT-1 | Can and End Buckle Tester
    • CET | Cork Extraction Tester
    • CG-D | Countersink Gauge
    • CHG | Contact Height Gauge
    • CIDG-1 | Can Internal Diameter Gauge
    • CLA-ECO | Can Leak Analyzer (3 positions)
    • CO2DA | AUTOMATIC SHAKER AND CO2 CALCULATOR
    • CO2-CS | Automatic CO2 Calculating System
    • CO2EASY / CO2EASY DIGITAL | CO2 Measuring Device
    • CO2-P | CO2 Purity Tester
    • CSM | Can Seam Micrometer
    • Digital Caliper
    • DYNA-4000 | Dynamometer
    • Dynamometers
    • ECDG-1 | End Curl Diameter Gauge
    • ER-1 | Enamel Rater
    • FHG | Fill Height Gauge
    • FHS | Fill height syringe
    • FT-1 | Fatigue Tester
    • FWG-1 | Flange Width Gauge
    • GBBT-1 | Glass Bottle Burst Tester
    • GBBT-2 | Glass Bottle Burst Tester
    • GBBT-AUTO | Automated Glass Bottle Burst Tester
    • GBIT | Glass Bottle Impact Resistance Tester
    • GCG | Gate Center Gauge
    • GDTB-1 | Gauge Data Trasportation Box
    • GDTB-4 | Gauge Data Transportation Box
    • HDC | Crown Cap Height and Thickness Gauge
    • HG-1 | Height Gauge
    • HWBC-1 | Hot Wire Bottle Cutter
    • HWBC-2 | Hot Wire Bottle Cutter
    • IDG-1 | Internal Diameter Gauge
    • LS-1 | Dome Height Lighting System for Glass Bottle
    • LSS | Lighting System (Bottle)
    • ODG-1 | Outer Diameter Gauge
    • PATT-1 | Pop and Tear Tester
    • PBBT-2 | PET Bottle Burst Tester
    • PBBT-ECO | PET Bottle Burst Tester
    • PBDT-1 | PET bottle drop tester
    • PGNG | Go-no-Go Gauge
    • PL-G | Polarization Light for Glass
    • PL-P | Polarization Light for Preform (PET Preform Stress Viewer)
    • PMBS | Preform & Bottle Measuring System
    • PPG-A / PPG-D | Preform Perpendicularity Gauge
    • PTG-A / PTG-D | Preform Thickness Gauge
    • PTG-1 | Plate Thickness Gauge
    • PVG-A/PVG-D | Pressure or Vacuum Gauge
    • PVG-P | PRESSURE OR VACUUM GAUGE
    • PVG-Pocket | Portable pressure or vacuum gauge
    • PVG-S | Medidor portátil de presión o vacío
    • SCT-D | Stress Crack Tester
    • SCT-PLC | Stress Crack Tester for PET Bottles
    • SeamCheck | Automatic Double Seam Projector
    • SeamCheck Plus | Automatic Double Seam Projector
    • SRG-1 | Score Residue Gauge
    • SS-1 | Seaming Cutting Saw
    • SSA-AUTO | Secure Seal Analyzer (Automated Model)
    • SSA-AUTO-F | Secure Seal Analyzer
    • SSA-ECO | Secure Seal Analyzer (ECO Model)
    • SSA-D | Secure Seal Analyzer (Standard Model)
    • SSA-PLC-12 | 12-Position Secure Seal Analyzer
    • SLG-1 | Can Seam Length Gauge
    • SRG-1 | Score Residue Gauge
    • SRG-1 | Score Residue Gauge
    • STG-1 | Seam Thickness Gauge
    • STR-1 | Seam Stripper
    • STS-1 | Swing Top Stopper Tester
    • TCT-2 | Traction and Compression Tester
    • TMV7 | Touchscreen Electronic Torque Tester
    • TORQUE CHECK | Handheld Torque Controller
    • TWB-1 | Thermostatic Water Bath
    • UBPT-1/1S | Universal Bottle Perpendicularity Tester
    • UBPT-2 | Universal Bottle Perpendicularity Tester
    • UBPT-3 | Universal Bottle Perpendicularity Tester
    • VLT-ECO | Vacuum Leak Tester (ECO Model)
    • VLT-PLC | Vacuum Leak Tester (PLC Model)
    • VLT-ST | Vacuum Leak Tester (Standard Model)
  • RESOURCES
    • REFERENCES
    • CFR 21 Compliance
    • Conversion tables
  • Store
  • Contact
  • Productos
  • PRODUCTOS AT2E
    • ABSD-1 | Equipo Muestreo Automático de Bebidas
    • ACBT-1 | Probador de Explosión Latas Aerosol
    • ACCC-1 | Taponadora de Corona Automática
    • ​ACWD-1 | Dispositivo automático de corte y pesaje de botella
    • ADATMV5 | Torquímetro Automatizado
    • ADATMV5-S | Torquímetro Automatizado Integrable en Línea
    • ADATMV - ECO | Torquímetro Semi-Automático
    • APKC-1 | Taponador Automático para Barril de Plástico (KEG)
    • BTG-D-S | Medidor de Espesor para Botellas
    • BWCS-A | Sistema para el Control de Pesaje de Botellas
    • BWCS-A | Bottle Weight Control System
    • Calibrador Digital
    • CDP-1 | Calibrador de Presión
    • CEBT-1 | Probador de Lata y Tapas de Anilla
    • GBBT-AUTO | Probador Automático de Explosión de Botellas de Vidrio
    • GCG | Calibrador de centrado
    • GDTB-1 | Caja de transferencia de datos
    • GDTB-4 | Caja de transferencia de datos
    • PBDT-1 | PET probador de caida
  • Referencias
  • RECURSOS
    • CFR 21 Conformidad
    • Tablas de conversión
  • Contacto