CEBT-1 | Can and End Buckle Tester​

AT2E’s CEBT-1 Can and End Buckle Tester was designed for testing the pressure resistance performance of the can dome and ends.  It can also perform the missile test for ends.
 
Full automated design, just press the start button after the sample was placed, then the test process will be accomplished automatically and results to be shown on screen.
 
Optimum designs, no need to change the clamps when testing the necked-in cans and straight-wall cans. User-friendly operation interface, makes it simpler in operation and maintenance. 
Attributes:
  • Optimum designs, simple in operation
  • PLC integrated & Touch screen control
  • Easy sample installation
  • No need to change clamps for necked-in cans and straight-wall cans
  • Pressurization speed adjustable, able to set different target pressure by steps
  • Two optional external pneumatic booster, able to increase the inlet pressure up to 2 or 4 times.
  • Stainless steel frame, strong and durable
  • Overloaded protection and various safety designs
  • Shows test result directly on screen. Able to review previous test results, auto calculate the average, maximum and minimum value.
  • RS232C data output
  • With calibration interface
 
Technical specification:
  • Sample: Beverage can, can ends
  • Measure range: 0-9 bar (0.9 Mpa)
  • Resolution: 0.01 bar
  • Data output: RS232C
  • Power supply: 230V / 50Hz
  • Air supply: 5 - 8 bar
  • Dimensions: 30” x 18” x 38” / 750 x 450 x 950 mm
  • Weight: 200 lbs / 90kg
 
Optional Items:
  • Additional end assembly for other sizes
  • Two models of additional booster
    • able to increase up to 2 times the line pressure; or
    • able to increase up to 4 times the line pressure

CEBT-1 Demo Video